SENA Parani-BCD110 - Manual (Page 20)

20
Figure 3-8 Connection(in) Window
If the Connection Wizard icon is clicked, an easy to use pairing menu will appear:
Figure 3-9 Connection Wizard Window
In this example we will refer to the two Parani-BCDx10s as BCD1 and BCD2 respectively. To use this
menu, please do the following:
Step 1. Connect BCD1 and then push the START button.
Step 2. Disconnect BCD1, connect BCD2 and then push the Next button after setting up Slave
configuration.
Step 3. Disconnect BCD2, once again connect the BCD1 and then push the Finish button. The pairing