SENA Parani-BCD110 - Manual (Page 24)

24
It may take about 5 seconds to complete the connection.
For the automatic connection to take place between BCD1 and BCD2, the proper operation mode of
BCD1 and BCD2 have to be set.
Figure 3-16 ParaniWizard Step 7
Set the operation mode of BCD2 to Mode1.
Figure 3-17 ParaniWizard Step 8
Remove the BCD2 from the host computer and plug BCD1 into the serial port again. Set the operation
mode of BCD1 to Mode2.