SENA Parani-SD1100 - Manual (Page 7)

7
1. Introduction
1.1. Overview
Parani-SD1100 is a terminal device for wireless serial communication using Bluetooth 2.0+EDR
technology that is an international standard of short range wireless communications. Parani-SD1100
can communicate with other Bluetooth devices; user may connect other Bluetooth devices that
support the Serial Port Profile.
The working distance of Parani-SD1100 with default antenna is 100m
Parani-SD1100 has a compact design, which allows it to be placed conveniently into various devices
or equipment. Its detachable antenna has the ability to optimize the quality and distance of wireless
communications.
Parani-SD1100 supports FHSS (Frequency Hopping Spread Spectrum), which is a technique, native to
Bluetooth that allows the Parani-SD1100 minimize radio interference while decreasing the likelihood of
over-air hijacking. Parani-SD1100 also supports authentication and Bluetooth data encryption.
Parani-SD1100 can be configured and controlled by a set of AT commands. Users can easily configure
Parani-SD1100 on a terminal program, such as HyperTerminal, and configure for wireless
communic
ation without modifying user’s existing serial communication program. User friendly
ParaniWIN can also be used for easy setup on Microsoft Windows.
1.2. Package Check List
1.2.1. Single Unit Package
SD1100-A1 (Stub antenna NOT included)
- Parani-SD1100
SD1100-00
- Parani-SD1100
- Stub Antenna
- DC Power Cable
- USB Power Cable
- DB9-Terminal Block
SD1100-01
- Parani-SD1100
- Stub Antenna
- DC Power Cable
- USB Power Cable
- DC Power Adapter
- DB9-Terminal Block
1.2.2. Bulk-Pack Package
SD1100-B10
- Parani-SD1100 x 10 EA
- Stub Antenna x 10 EA
- DC Power Cable x 10EA