SENA Parani-SD1100 - Manual (Page 21)

21
The signal strength test shows LinkQuality and RSSI values. The closer LinkQuality is to 255 and
RSSI is to 0, this means the Parani-SD1100 has a good connection to the connected Bluetooth device.
In general, the wireless connectivity is at its best within 10 meters. You can push the [STOP] button at
anytime in order to terminate the signal strength test. The signal strength test will continue until the
[STOP] button is pushed. If you close the ParaniWIN Window without pushing the [STOP] button, you
must restart Parani-SD1100 to terminate the test.
Connection(in) icon will show the following window, which enables the Parani-SD1100 to wait for a
connection from another Bluetooth device. If the waiting time is set to 0, Parani-SD1100 will continually
wait for connection until [Cancel] button is clicked.
Figure 3-9 Connection (in) Window
If the Connection Wizard icon is clicked, an easy to use pairing menu will appear: