SENA Parani-SD1100 - Manual (Page 25)

25
Figure 3-15 Firmware Update Kit
* Note: DO NOT power off Parani-SD1100 while the firmware update is progressing, this may damage
the Parani-SD1100.
3.13. Terminal Program
A terminal program is typically an application that will enable a PC to communicate directly with a
modem. If you are using Windows 98SE or higher version of Windows, HyperTerminal program is
included as part of the operating system. Parani-SD1100 provides some extended AT commands for
configuration of the Parani-SD1100.
This manual will explain the method using HyperTerminal. If you need to install HyperTerminal, click
start>setting>control panel>add/remove programs. For more precise details on HyperTerminal
installations, please refer to Microsoft Windows Help section. SD1100 does not support Flow Control.
.
Figure 3-16 HyperTerminal