SENA PS810 - Manual (Page 98)

98
Appendix 4. Guide To The Bios Menu Program
A 4.1. Overview
The bios menu provides a way to recover the Pro Series unit, by using TFTP, as a disaster recovery
option and to diagnose the system hardware. If the user presses the key within 3 seconds
after the Pro Series unit is powered up, the user will enter the bios menu program. From this menu
program, the user can set various system parameters, test system hardware, and perform firmware
upgrades.
Note: For PS110, the bios menu will be displayed only when the Data/Console switch is located at the
Console side.
A 4.2. Main Menu
After entering the bios menu program, the user will see following main menu page:
-----------------------------------------------------------------------------
BIOS v1.0.0 (c) 1998-2005 Sena Technologies, Inc.
-----------------------------------------------------------------------------
-----------------------------------------------------------------------------
Welcome to Boot Loader Configuration page
-----------------------------------------------------------------------------
Select menu
1.
RTC Configuration
2. Hardware test
3. Firmware upgrade [S/W Version : v1.0.0]
4. Exit and boot from flash
5. Exit and reboot
Back, Refresh
----->
Figure A-9 Main Menu Page of Bios Menu
A 4.3. RTC Configuration Menu
Using the RTC configuration menu, the user can set the system time of the Pro Series. (There is no
RTC configuration menu in case of PS110)
-----------------------------------------------------------------------------
RTC Configuration
-----------------------------------------------------------------------------
Select Menu
1. Data(mm/dd/yy) : 05/19/05
2. Time(hh:mm:ss) : 15:02:28