Ocean Optics Multimode Spectrum - Manual (Page 15)

Appendix A
Specifications
Specifications Criteria
Optical
Optical Power Output > 350mW (375 mW typical)
Output Power Stability +/- 1%
Wavelength 785 nm (+/- 1 nm)
3 dB Bandwidth (FWHM) Typical: 0.12 nm Max: 0.20 nm
Spectral Line Width <0.2nm, FWHM
Wavelength Stability +/- 0.1 nm (-20 to 55ºC) over temperature range and
lifetime
Optical Signal-to-Noise Ratio (SMSR) Typical: 45 dB Min: 35 dB
Output Fiber 100-105/125 µm@ 0.22NA (or Free Space output)
Connector SMA 905 (FC/PC optional)
Electrical
Supply Voltage Typical: 5V Min: 4.9V Max: 5.1V
Power Consumption Typical: 3.5W Max: 5.5W
Photodiode Current 30 µA
Case Temperature Sensor 1000 Ohm at 0º C (RTD)
Laser Setpoint Control (LD SET) Typical: 0.9V Min: 0 V Max: 1.0 V (when Pin 2 is
grounded)
Warm-up Time 10 sec. from cold start; 1.5 sec. from warm start
Connector 10-pin, Molex #53014-1010 (mating connector:
51004-1000)
Mechanical
Physical Dimensions 7.6 cm x 6.4 cm x 1.8 cm
Weight 100 grams
Case Material Anodized aluminum
LASER-785-IP -01-1208 7