Ocean Optics JAZ-CBL-DB15 Accessory Cable - Manual (Page 3)

JAZ-ADP-GPIO and JAZ-CBL-DB15 Instructions
013-40000-000-01-201102 3
Pin # Function Description
9 SINGLE_STROBE (3.3v Logic)
10 SDA1 OOI use only. See the Jaz Data Sheet for more
information.
11 SPI_CLK OOI use only. See the Jaz Data Sheet for more
information.
12 SPI_CS OOI use only. See the Jaz Data Sheet for more
information.
13 MOSI OOI use only. See the Jaz Data Sheet for more
information.
14 MISO OOI use only. See the Jaz Data Sheet for more
information.
15 GPIO4 (3.3v Logic)
16 GPIO5 (3.3v Logic)
17 GPIO6 (3.3v Logic)
18 5V_GPIO 5 volt accessory power
19 GPIO7 (3.3v Logic)
JAZ-CBL-DB15 Accessory Cable
The Ocean Optics JAZ-CBL-DB15 is an accessory cable for the Jaz DPU modules that contain the
DPU GPIO (DPUs dated after January 1, 2008) and DPUs that have the JAZ-ADP-GPIO attached.
This 12-inch cable connects the 19-pin mini-HDMI accessory connector on the Jaz DPU GPIO (or the
JAZ-ADP-GPIO Adapter) and terminates in a DB15 connector.
Connecting the Accessory Cable
► Procedure
1. Connect the accessory cable to the 19-pin mini-HDMI connector on the Jaz DPU module.