Ocean Optics Laser-785 - Manual (Page 10)

1: Introduction
• Rugged design with laser welded key component
• Hermetically sealed laser component
• Low power consumption with 5VDC input
• Operating between –10
o
C to 40
o
C
• Long life time > 10,000 hours
• Best performance-to-cost ratio
• Ideal for medical and sensor instruments
Package Contents
Your Laser-785 package contains the following:
One (1) Ocean Optics Laser-785
One (1) power cord
Two (2) keys
One (1) remote plug
One (1) Test Results sheet
Additional Equipment Required
The following equipment, available from Ocean Optics, is also required to use your Laser-785:
A 100 µm output fiber or a Raman Probe (such as the RIP-RPS)
Caution
Never use an output fiber that is smaller than 100 µm. In addition, you must use
epoxy-free fiber, otherwise it can damage the internal fiber optics.
Safety goggles (R-2001-GL goggles from Ocean Optics are recommended)
2 000-30000-010-02-0605