Pfister F-046-SYKK - Manual (Page 5)

ENGLISH
ENGLISH
FAUCET FUNCTIONS
MAINTENANCE & CARE
15
17
16
18
CAUTION: Maintenance
DISASSEMBLY
1.
Replacement parts may be available at the store where you purchased
your faucet.
2. When replacement parts are not available, please write or call Price
Pfister Consumer Service.
3. Always turn off water and relieve pressure before working on your
faucet.
NOTE: Trim Care
Cleaning Instructions:
For all Handles and decorative finishes, use only a soft damp
cloth to clean and shine. Use of polish, detergents, abrasive
cleaners, organic solvents or acid may cause damage. Use of
other than a soft damp cloth will nullify our warranty!
Special Trim:
Trim products which contain Porcelain or other similar
substance are not acceptable for public areas or Commercial
use. Installation of Said Trim is at Users Risk!
1–800–PFAUCET (1–800–732–8238)
For Toll-Free Pfaucet information call
1–800–PFAUCET (1–800–732–8238)
or visit www.pricepfister.com
• Installation Support
• Care and Warranty Information
15 UNIT START UP
Turn on hot and cold water supplies, and check for leaks above and below the sink.
16 FAUCET FUNCTION
COLD valve: close-counterclockwise, open-clockwise; HOT valve: close-clockwise,
open-counterclockwise.
17 HANDLE REMOVAL
Turn off water before proceeding! Unscrew Fastener (17A), and remove Handle
Lever (17B) from Valve Stem (17C). Unscrew Handle Flange (17D) using Installation
Tool (17E). Remove Mounting Ring (17F).
18 CARTRIDGE REPLACEMENT
Turn off water supplies and relieve pressure before working on your faucet (see
step 2). Remove Handles (see step 17). Using Installation Tool (18A), unscrew Cartridge
Assembly (18B) and inspect. Replace parts as necessary.
5
OPEN
HOT COLD
OPEN
17B
18B 18A
18B
17A
17C
17D
17E
17F