Crown Audio IQ 5.1 Software for Windows IQ Mixers - Manual (Page 7)

MPX-6, SMX-6, AMB-5
Use the Aux out button control to turn the output auxiliary port of the unit on and off. When on, +15 VDC
is supplied across pins 1 (ground) and 3 (+):
Aux In
Applies To
MPX-6, SMX-6, AMB-5
P
The Aux In indicator will "light up" when the presence of an input signal (5 to 30 VDC) is detected across
pins 1 (ground) and 2 (+) of the Aux port: R
Bus
E
MPX-6, SMX-6, AMB-5
Applies To
L
Each IQ mixer/multiplexer has two switchable "bus" outputs (one for each output channel). They receive
the exact same post-fader audio signal that the main outputs receive. They are turned on and off with the
Bus controls. I
N
R
Y
M
Applies To
Auto
I
Use the Auto button control to activate any of the Auto functions that you have set up in your
mixer/multiplexer.
SMX-6, AMB-5
A
Applies To
Output level meters
SMX-6, AMB-5.
The peak output level of each channel is shown by the blue bar graphs on the right side of the
control panel
Toolbar
Applies To
Page 7 of 18 ©2002 by Crown Audio Inc.