Crown Audio ScreenArray PIPS:4622, 3632, 4632 - Manual (Page 16)

ScreenArray ® PIP Modules
Page 16 Operation Manual
If you don’t have the original carton, you may obtain a product service foam-in-place shipping pack from
Crown Factory Service at the number listed below. For non-warranty service, you may also provide your
own shipping pack, however we still recommend using a Crown supplied shipping container. Minimum
recommended requirements for materials are as follows: 275 P.S.I. burst test Double-Wall carton that
allows for 2-inch solid Styrofoam on all six sides of unit or 3 inches of plastic bubble wrap on all six sides
of unit; securely seal the package with an adequate carton sealing tape. Do not use light boxes or
“peanuts.” Damage caused by poor packing cannot be covered under warranty.
4. Do not ship the unit in any kind of cabinet (wood or metal). Ignoring this warning may result in
extensive damage to the unit and the cabinet. Accessories are not needed–do not send the product
documentation, cables and other hardware.
If you have any questions, please contact Crown Factory Service.
Crown Factory Service
1718 W. Mishawaka Rd.
Elkhart, Indiana 46517 U.S.A.
Telephone:
574-294-8200
800-342-6939 (North America,
Puerto Rico, and Virgin Islands only)
Facsimile:
574-294-8301 (Technical Support)
574-294-8124 (Factory Service)
Internet:
http://www.crownaudio.com