Troubleshooting, Replace the filter when – Factory Direct Hardware Hansgrohe 04301 Talis S User Manual
Page 14

14
Troubleshooting
Problem
Possible Cause
Solution
Tap drips for several minutes
after being turned off
not a problem -- normal operation of tap
Ultraviolet light does not turn on Filter is not plugged in
Plug filter in
Outlet is controlled by a switch
Turn switch on
Outlet is faulty
Test the outlet
Ultraviolet light must be
replaced
Replace ultraviolet light
Flow is unattractive when tap is
first turned on
not a problem -- normal operation of tap
Flow reduces over time
Filter is dirty
Replace filter*
Replace the filter when:
the filter has been in use for 6 months or more, or has processed approximately 00 gallons of
water
the filter is visibly dirty
the swirling bubble action of the filter is reduced
the flow of water from the tap is reduced.
•
•
•
•
*To purchase replacement filters, contact Zuvo™ at 866 686 8142 or go to
www.Zuvowater.com.