Factory Direct Hardware Hansgrohe 04301 Talis S - Manual (Page 12)

12
English
Open the stops.
Check all connections for leaks.
When all connections are secure, plug the filter
unit into the electrical outlet.
Open the tap.
Allow the tap to run for at least
five minutes before using it for
the first time.
Do not drink the water coming
from the system during this
initial start-up.
The flow from the tap may be unattractive for a
few seconds when it is first turned on.
Check the filter. Make sure that the ultraviolet light
is on.
The tap may drip for several
minutes when it is turned off.
This is normal, and is not a
product defect.