Dexter Laundry T-50X2 EXPRESS (On-Premise) - Manual (Page 7)

Procedure
1. Make sure the dryer is not in a dry cycle. The 4-digit numeric display on the dryer controller will show
“LOAd” when the dryer is not in a dry cycle.
2. Press and release the UP or DOWN arrow keys on the dryer controller touch pad to chose the dry
cycle that you want to change (dry cycle 1 through 5). The dry cycle L.E.D. will illuminate to indicate
which dry cycle you are choosing. If you press either arrow key and hold it down, the controller will
sequence through the fi ve dry cycles.
3. Press and release the CYCLE key on the dryer controller touch pad once you have chosen the dry
cycle you want to change. After you press this key, the programming L.E.D. and the dry time L.E.D.
will illuminate. The dry cycle L.E.D. will remain illuminated. The total dry time will also be displayed on
the 4-digit numeric display.
4. Press and release the UP or DOWN arrow keys to change the total cycle time. Once either of the ar-
row keys is pressed, the dry time L.E.D. and the total dry time on the 4-digit numeric display will fl ash.
If you press and hold either arrow key down, you will increment (UP arrow) or decrement (DOWN ar-
row) through the total dry times available (1 through 60 minutes). This displayed dry time includes the
cool down time along with the heated time. To not change the total dry time, do not press the arrow
keys to change the total dry time.
5. Press and release the SELECT/ENTER key. Once this key is pressed and released, the dry time L.E.D.
will switch off, the dry cycle L.E.D. and programming L.E.D. will remain on, and the temperature L.E.D.
will illuminate. The drying temperature will also be shown on the 4-digit numeric display.
6. Press and release the UP or DOWN arrow keys to change the drying temperature. Each press and re-
lease of the arrow keys will either increase or decrease the temperature by fi ve degrees Fahrenheit or
three degrees Celsius, depending on how your dryer controller is set up. Once either of the arrow keys
is pressed, the temperature L.E.D. and the drying temperature on the 4-digit numeric display will fl ash.
If you press and hold either arrow key down, you will increment (UP arrow) or decrement (DOWN
arrow) your way through the available drying temperatures (10So Fahrenheit or 40° Celsius, up to
19So Fahrenheit or 9( Celsius). If you do not want to change the drying temperature, do not press the
arrow keys. Go to the next step.
7. Press and release the SELECT/ENTER key. Once this key is pressed and released, the temperature
L.E.D. will switch off, the dry cycle L.E.D. and programming L.E.D. will remain on, and the cool down
L.E.D. will illuminate. The cool down time will also be shown on the 4-digit numeric display. 8) Press
and release the UP or DOWN arrow keys to change the cool down time. Once either of the arrow keys
is pressed, the cool down L.E.D. and the cool down time on the 4-digit numeric display will fl ash. If
you press and hold either arrow key down, you will increment (UP arrow) or decrement (DOWN arrow)
through the cool down times available (2 through 60 minutes). To not change the cool down time, do
not press the arrow keys. Go to the next step.
8. Press and release the SELECT/ENTER key. Once this key is pressed and released, the cool down L.E.D.
and the programming L.E.D. will switch off, and the dry cycle L.E.D. will remain on. The fl ashing cool
down time on the 4-digit display will stop fl ashing and remain.
9. At this point, you have two choices. 1) You can perform the modifi ed dry cycle by pressing and re-
leasing the START key on the dryer controller touch pad, or 2) You can clear the modifi ed dry cycle
program by pressing and releasing the STOP key once. If you start the modifi ed cycle, the total dry
time will appear on the 4-digit numeric display and it will count down to 0 as the dry cycle progresses.
If you choose to clear the modifi ed dry cycle, the 4-digit numeric display will change to “LOAd”.
7
Part # 8533-069-001 12/13