Dexter Laundry T-50X2 EXPRESS (On-Premise) - Manual (Page 11)

9. Press and release the DOWN arrow touch pad key twice until the dryer controller display shows the
number “3”.
10. Press and release the SELECT/ENTER touch pad key. The dry time L.E.D. and the programming L.E.D.
will remain on and the cool down L.E.D. will switch off. The dryer controller display will change to
“Prog”.
11. Press and release the STOP touch pad key. The dry time L.E.D. will remain on and the programming
L.E.D. will switch off. The dryer controller display will change to the word “LOAd”.
The dryer is now ready for the new modifi ed dry cycle to start. This modifi ed dry cycle 1 program will re-
main in the dryer controller memory until the default settings push button is pressed. This default settings
push button is located on the component side of the dryer controller printed circuit board at the middle
center side of each circuit board controls.
11
Part # 8533-069-001 12/13