Operating controls – dbx 234s Crossover User Manual
Page 9
9
223s, 223xs,
234s, 234xs
STEREO 3-WAY MODE
In 3-way stereo operation the controls are marked in black BELOW the horizontal black line.
Channel One and Channel Two functions are identical in the stereo mode. LEDs are disabled for
controls which are non-functional in this mode.
[1] & [7]
I
nput
G
aIn
Controls the INPUT level with +/- 12 dB of gain.
[2] & [8]
L
ow
/M
Id
Selects crossover point between LOW and
MID
frequencies.
[3] & [9]
M
Id
/H
IGH
Selects crossover point between MID and HIGH
frequencies.
[4] & [10]
L
ow
o
utput
Controls the Low Frequency output level with a
range
of
-∞ to +6 dB.
[5] & [11]
M
Id
o
utput
Controls the Mid Frequency output with a range of
-∞ to +6 dB.
[6] & [12]
H
IGH
o
utput
Controls the High Frequency output with a range
of
-∞ to +6 dB.
[13] & [19]
L
ow
C
ut
Switch for selecting the 40 Hz high pass filter. An
LED indicates the selection.
[14] & [20]
x
10 LEd
Indicates that the LOW/MID crossover frequency
range is 450 Hz to 9.6 kHz.
[15] & [21]
p
HasE
I
nvErt
Switch for reversing the polarity on the LOW
Output. An LED indicates the selection.
[16] & [22]
p
HasE
I
nvErt
Switch for reversing the polarity on the MID
Output. An LED indicates the selection.
[17] & [23]
p
HasE
I
nvErt
Switch for reversing the polarity on the HIGH
Output.
An
LED
indicates
the
selection.
[18] s
tErEo
LED indicating stereo mode operation.
Section 2
Operating Controls
4
1 2 3 4 5 6 7 8 9 10 11 12
13 14 15 16 17 18 19 20 21 22 23