Operating controls – dbx 234s Crossover User Manual
Page 10
10
223s, 223xs,
234s, 234xs
MONO 4-WAY MODE
In 4-way mono operation the controls are marked in red ABOVE the horizontal black line.
Front panel controls not described in this section are not active in mono 4-way mode. LEDs
are disabled for controls which are non-functional in mono 4-way mode.
[1]
I
nput
G
aIn
Controls the INPUT level with +/- 12 dB of gain.
[2]
L
ow
/L
ow
-M
Id
Selects crossover point between LOW and LOW-MID
frequencies.
[3]
L
ow
-M
Id
/H
IGH
-M
Id
Selects the crossover point between LOW-MID and
HIGH-MID frequencies.
[4]
L
ow
o
utput
Controls the LOW frequency output level with a
range
of
-∞ to +6 dB.
[5]
L
ow
-M
Id
o
utput
Controls the LOW-MID frequency output level with
a
range
of
-∞ to +6 dB.
[6]
H
IGH
-M
Id
/H
IGH
Selects the crossover point between HIGH-MID
and
HIGH
frequencies.
[7]
H
IGH
-M
Id
o
utput
Controls the HIGH-MID frequency output level
with a range of -∞ to +6 dB.
[8]
H
IGH
o
utput
Controls the HIGH frequency output level with a
range
of
-∞ to +6 dB.
[9]
L
ow
C
ut
Switch for selecting the 40 Hz high pass filter. An
LED indicates the selection.
[10]
x
10 LEd
Indicates that the LOW/LOW-MID crossover
frequency range is 450 Hz to 9.6 kHz.
[11]
p
HasE
I
nvErt
Switch for reversing the polarity on the LOW
Output. An LED indicates the selection.
[12]
p
HasE
I
nvErt
Switch for reversing the polarity on the LOW-MID
Output. An LED indicates the selection.
[13]
M
ono
LED indicating mono mode operation.
[14]
p
HasE
I
nvErt
Switch for reversing the polarity on the HIGH-MID
Output. An LED indicates the selection.
[15]
p
HasE
I
nvErt
Switch for reversing the polarity on the HIGH
Output. An LED indicates the selection.
Section 2
Operating Controls
5
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15