dbx 234s Crossover - Manual (Page 11)

11
223s, 223xs,
234s, 234xs
2.2 dbx 223s/223xs Front Panel
Note:
There are no front panel differences between the 223s and the 223xs. Therefore the
223xs is shown below, representing both the 223s and the 223xs.
STEREO 2-WAY MODE
In 2-way stereo mode the controls are marked in black BELOW the horizontal black line.
Channel One and Channel Two functions are identical in the stereo mode. LEDs are disabled for
controls which are non-functional in this mode.
[1] & [5] I
nput
G
aIn
Controls the INPUT level with +/- 12 dB of gain.
[2] & [6] L
ow
/H
IGH Selects crossover point between the LOW and
HIGH outputs.
[3] & [7] L
ow
o
utput
Controls the Low Frequency output level with a
range of -∞ to +6 dB.
[4] & [8] H
IGH
o
utput Controls the High Frequency output with a range
of -∞ to +6 dB.
[9] & [14] L
ow
C
ut
Switch for selecting the 40 Hz high pass filter. An
LED indicates the selection.
[10] & [15]
x
10 LEd Indicates that the LOW/HIGH crossover frequency
range is 450 Hz to 9.6 kHz.
[11] & [16] p
HasE
I
nvErt
Switch for reversing the polarity on the LOW
Output. An LED indicates the selection.
[12] & [17] p
HasE
I
nvErt
Switch for reversing the polarity on the HIGH
Output. An LED indicates the selection.
[13] s
tErEo
LED indicating stereo mode operation.
Section 2
Operating Controls
6
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 17