Specifications – dbx TR1616 User Manual
Page 30
TR1616
Owner’s Manual
24
SpecificationS
ANALOG INPUTS
Number of Inputs:
16
Connectors:
Combination Female XLR and 1/4” Jack
Type:
Electronically
balanced,
RF
Filtered
Impedance:
XLR
input:
3kΩ,
1/4” input: 20kΩ balanced, 10kΩ unbalanced
Maximum Input Level:
XLR Input: +18dBu at minimum gain
1/4” Input: +33dBu at minimum gain
Gain:
XLR Input: 0 to +60dB
1/4” Input: -15 to +45dB
EIN:
-125dBu,
22Hz-22kHz,
150Ω source impedance
CMRR:
>40dB,
typically
55dB,
22Hz-22kHz
Dynamic Range:
110dB unweighted, 113dB A-weighted
Frequency Response:
10Hz to 40kHz, +/- 0.25dB at 96kHz
10Hz to 20kHz, +/- 0.25dB at 48kHz
THD+N:
Typically 0.002% at 1kHz, 0dBu XLR input, gain set to minimum
Interchannel Crosstalk:
<100dB, 22Hz to 22kHz
ADC Latency:
37/Fs (0.77msec at 48kHz)
Phantom Power:
+48VDC, applied to XLR pins 2 and 3 through 6.81k resistors
Pad:
20dB
Low Cut Filter:
2-pole Butterworth filter at 80Hz
Polarity: Normal
or
Reverse
ANALOG OUTPUTS
Number of Outputs:
16
Connectors:
Male
XLR
Type:
Cross-Coupled Electronically balanced, RF Filtered
Impedance:
40Ω balanced, 20Ω unbalanced
Maximum Output Level:
+20dBu into 2kohm load or greater
Dynamic Range:
112dB unweighted, 115dB A-weighted
Frequency Response:
10Hz to 40kHz, +/- 0.25dB at 96kHz
10Hz to 20kHz, +/- 0.25dB at 48kHz
THD+N:
Typically 0.006% at 1kHz, 0dBu output
Interchannel Crosstalk:
<-100dB, 22Hz to 22kHz
DAC Latency:
29/Fs (0.60msec at 48kHz)