Warning, Installation procedure – Swanstone WW-6000 - Installation User Manual
Page 13

Model SW-7036 and SW-7060 Shower Wall Kits. The
sides of the corner panels are different widths. One side
is 6 inches wide and the other is 8 inches wide. The
orientation of the corner panel will affect the allowable
width of the wall dimensions. Refer to the illustration for
proper orientation.
Fumes Hazard
The fumes from the silicone adhesive
and solvents used by the installer can
be harmful if used in an unventilated
room. Always work in a well-ventilated area. To keep the
area well-ventilated, open windows and use exhaust fans.
If adequate ventilation is not achievable or practical, use
respiratory protective equipment.
2.
Clean the back of the panel with denatured alcohol.
Do not use oil-based cleaners, such as mineral spirits, to
clean the panels. The oil in the cleaner will prevent the
panel from properly adhering to the wall.
3.
Apply the silicone in 1-1/4 inch diameter dots every
8 to 10 inches over the back surface of the panel.
Follow the silicone manufacturer’s instructions and
note all ventilation and installation precautions.
IMPORTANT NOTICE
WARNING
8”
8”
34”
or less
Over 34”
BACK WALL
SIDE W
ALL
BACK WALL
SIDE W
ALL
6”
6”
IMPORTANT NOTICE
800-325-7008
13
The Swan Corporation
Installation Procedure