Prokit's Industries PT-1361 - Manual (Page 7)

6
6.8 Screw driving
We recommend using self-centering screws (e.g. Torx screws, recessed head screws)
designed for reliable working. Be sure to use a bit that matches the screw in shape and size.
Set the torque, as described elsewhere in these operating instructions, to suit the size of
screw.
7. Cleaning, maintenance and ordering of spare parts
Always pull out the mains power plug before starting any cleaning work.
7.1 Cleaning
Keep all safety devices, air vents and the motor housing free of dirt and dust as far as
possible.
Wipe the equipment with a clean cloth or blow it with compressed air at low pressure.
We recommend that you clean the device immediately each time you have finished using it.
Clean the equipment regularly with a moist cloth and some soft soap. Do not use cleaning
agents or solvents; these could attack the plastic parts of the equipment. Ensure that no
water can seep into the device
7.2 Maintenance
There are no parts inside the equipment which require additional maintenance.
7.3 Ordering replacement parts
Please quote the following data when ordering replacement parts: Type of machine Article
number of the machine Identification number of the machine Replacement part number of
the part required For our latest prices and information please go to www.prokits.com.tw
8. Disposal and recycling
The unit is supplied in packaging to prevent its being damaged in transit. This packaging is
raw material and can therefore be reused or can be returned to the raw material system.
The unit and its accessories are made of various types of material, such as metal and
plastic. Defective components must be disposed of as special waste. Ask your dealer or
your local council.
9. Storage
Store the equipment and accessories out of children’s reach in a dark and dry place at
above freezing temperature. The ideal storage temperature is between 5 and 30 °C. Store
the electric tool in its original packaging.