Prokit's Industries SS-989 - Manual (Page 4)

3
II. Features and Specifications
Features:
2 in 1 Rework Station to save the cost
Antistatic soldering iron and hot air desoldering 2 in 1 design to save the cost.
Closed Circuit Sensor Design
Closed-loop temperature control for accurate and air-flow-independent
temperature
High Power, Quick Warm Up Times
High heating power, warm up quickly, adjustable temperature and air flow for
easy surface or hole mount components QFP, SOP type IC devices rework.
Individual Function Start Save Energy
Individual function starts save energy, or share function by 2 users at the
same time, three knobs control hot air volume, hot air temperature, and
soldering iron temperature.
LED Digital Display
Digital LED displays for both rework and soldering station
Quiet in operation
Diaphragm pump with maximum capacity at 24L/min, equipment noise less
than 45dB, wind volume and temperature are adjustable, suitable for many
kinds of use
Auto Cool-Off Process
After power switch is turned off, the auto cool-off process leaves the blower
on until the nozzle is cool in order to prolong the life of heating element and to
ensure safety
ESD Safe Design
Prevent static and leakage electric to damage the PCB.
Interchangeable hot air nozzles and tips
Interchangeable hot air nozzles and tips design for different type of surface
mount components. Also applicable to most of branded nozzles and tips.