Prokit's Industries MT-3120 - Manual (Page 8)

2A Mini Autorange Clamp Meter user manual
28
5. MAINTENANCE
5.1 REPLACING THE BATTERIES
WARNING
To avoid electric shock, make sure that the test leads have
been clearly move away from the circuit under measurement
before opening the battery cover of the meter.
5.1.1 If the sign “ ” appears, it means that the batteries should be replaced.
5.1.2 Loosen the fixing screw of the battery cover and remove it.
5.1.3 Replace the exhausted batteries with new ones.
5.1.4 Put the battery cover back and fix it again to its origin form.
NOTE:
Do not reverse the poles of the batteries.
5.2 REPLACING TEST LEADS
WARNING
The replacement must be test leads in good working condition
with the same or equivalent rating: 1000V 10A.
A test lead must be replaced if the insulation layer has been damaged, e.g. the
wire inside is exposed.
2A Mini Autorange Clamp Meter user manual
29
6. ACCESSORIES
1) Test Leads: Electric Ratings 1000V 10A 1 pair (set)
2) Operating Manual 1 copy
2A Mini Autorange Clamp Meter user manual
30
Certificate Number: TW98/12323QA