Firmware upgrade – Sena Bluetooth SPH10H v4.2 User's Guide User Manual
Page 31
SPH10H
32
3. Take out the module from the front of the ear flap to
see the reset pin-hole on the opposite side of the
module.
Detach
4. Insert a paper clip into the reset pin-hole and press
the reset button for 1 second with light pressure, at
which time the SPH10H will be switched off. Turn
the SPH10H back on. By powering back on, this will
restore your current settings.
21. FIRMWARE UPGRADE
The SPH10H supports firmware upgrade function.
Please visit Sena Bluetooth web site at www.
senabluetooth.com to check the latest software
downloads.