Sena Bluetooth SPH10H v4.2 User's Guide - Manual (Page 20)

21
SPH10H
English 11. STEREO MUSIC
You can listen to stereo music in two ways: with the
enclosed stereo audio cable or by Bluetooth wireless
stereo.
11.1 By Stereo Audio Cable
Plug your stereo MP3 player directly to the SPH10H
by using the enclosed stereo audio jack cable. To
adjust the volume, rotate the Jog Dial on the headset.
You may adjust the volume on the MP3 player also.
MP3 Jack
11.2 By Bluetooth Wireless Stereo
The Bluetooth audio device must be paired with the
SPH10H by following the “Bluetooth Stereo Device
Pairing” procedures described in the 6.2 chapter. The
SPH10H supports the Audio/Video Remote Control
Profile (AVRCP), so if your Bluetooth audio device
also supports the AVRCP, you can use the SPH10H to
remotely control music playback.
You not only can adjust the volume but also use
the functions such as play, pause, next track and
previous track.
1. To adjust the volume, rotate the Jog Dial.
2. To play or pause music, press and hold the Jog
Dial for 1 second until you hear a double beep.