Sena Bluetooth SPH10H v4.2 User's Guide - Manual (Page 17)

SPH10H
18
The voice prompt for each menu item is as below:
(1) VOX phone (4) Delete all pairings
(2) VOX intercom (5) Exit configuration
(3) Voice prompt
VOX phone
Exit configuration VOX intercom
Delete all pairings Voice prompt
9.1 Enabling/Disabling Voice Activated
Phone Answering
Voice Prompt “VOX phone”
Factory Default Enable
Enable Tap the Phone Button
Disable Tap the Jog Dial
If this feature is enabled, you can answer incoming
calls by simply saying a word loudly enough. For
example, when you hear a series of beeps for an
incoming call, you can answer the phone by saying
“Hello” or any other word loudly. This is enabled from
the factory but you can disable this. If this mode is
disabled, you have to tap the Jog Dial or the Phone
Button to answer an incoming call.
9.2 Enabling/Disabling Voice Activated
Intercom
Voice Prompt “VOX intercom”
Factory Default Disable
Enable Tap the Phone Button
Disable Tap the Jog Dial
If this feature is enabled, you can initiate an intercom
conversation with the last connected intercom
friend by speaking any word loudly enough.The
most effortless way to trigger intercom VOX is to
blow into the microphone as if blowing dust off the
microphone. If you start an intercom conversation
by VOX, the intercom terminates automatically when
you and your intercom friend remain silent for 20
seconds. However, if you manually start an intercom
conversation by tapping the Jog Dial, you have to
terminate the intercom conversation manually.