Knape&Vogt BYP-60S Series - Manual (Page 2)

Hmax = Door Height + 1-7/8"
Hmin = Door Height + 1-1/2"
1
PRePARe OPeNING 2-Door Width = 2 x Door Width - 1"
3-Door Width = 3 x Door Width - 2"
SLIDING DOOR HARDWARe - BY PASS
Assembly
Instructions
Note: For 3/4" doors, use Carrier
A on rear door. For 1" to 1-3/8"
door, use Carrier A on front door.
#310288_C (1013)
3/4" Door
1,9 cm Porte
1,9 cm Puerta
Opening Height
Hauteur Ouverture
Altura Abertura
Opening Height
Hauteur Ouverture
Altura Abertura
1" - 1-3/8" Door
2,5 cm - 3,5 cm
Porte
2,5 cm - 3,5 cm
Puerta
B A B A
5/8"
(1,6 cm)
5/8"
(1,6 cm)
3/8" - 1/2"
(1 cm - 1,3 cm)
3/8" - 1/2"
(1 cm - 1,3 cm)
Front
Avant
Delantera Front
Avant
Delantera
Door Height
Hauteur Porte
Altura Puerta
Door Height
Hauteur Porte
Altura Puerta
1-1/8" - 1-3/8"
(2,9 cm - 3,5 cm)
1-1/8" - 1-3/8"
(2,9 cm - 3,5 cm)
1"
(2,5 cm)
1"
(2,5 cm)
2-1/2"
(6,4 cm)
2-3/4"
(7 cm)
2
MOuNt FRAMe HARDWARe
• Center track in opening.
• Using track as template, mark screw locations.
• Drill 3/32" pilot holes and secure with (#8 x 1-1/4") screws.
(F)
Note: If necessary, track
may be cut with a fine
tooth saw.