Peerless-AV SA761P - Installation - Manual (Page 7)

7 of 32 ISSUED: 03-30-10 SHEET #: 095-9346-5 05-11-12
NOTE: Refer to PLP model instruction sheet for attachment of dedicated PLP plate to screen. Install two M10
x 15mm screws (provided with dedicated PLP plate) into top two holes of dedicated PLP plate leaving 1/4" of
exposed thread as shown in fi gure 4.1.
Insert two M10 x 15mm screws (E) into bottom holes of adapter plate as shown in fi gure 4.2. Tighten all fasteners
with 6mm allen wrench (H).
4-1
• Do not lift more weight than you can handle. Use additional man power or mechanical lifting equipment to safely
handle placement of the screen.
• Do not tighten screws with excessive force. Overtightening can cause damage to mount. Tighten M10 x 15mm
screws (E) to 40 in. • lb (4.52 N.M.) maximum torque.
WARNING
Mounting Flat Panel Screen
4
1/4"
M10 X 15MM SCREW
DEDICATED PLP PLATE
ADAPTER PLATE
fi g. 4.1
E
DEDICATED PLP PLATE
ADAPTER PLATE
fi g. 4.2