Warning, Arm tension adjustment – Peerless-AV SA761P - Installation User Manual

Page 10

Text mode
Original mode

10 of 32

ISSUED: 03-30-10 SHEET #: 095-9346-5 05-11-12

If more or less tension is desired in the arm pivot points, do the following:
• To increase tension, turn socket screw clockwise with 5mm allen wrench (I). NOTE: Tighten screws to
50 in • lbs (5.6 N.m.) maximum torque.
• To reduce tension, turn socket screw counter-clockwise with 5mm allen wrench (I). NOTE: Do not turn more
than half a turn.

• Do not remove screw or loosen screw until it is no longer engaged with the mount. Doing so may cause the screen

to fall.

• If screws become loose over time, tighten screws as necessary. Tighten screws to 50 in • lbs (5.6 N.m.) maximum

torque.

WARNING

TENSION SCREWS

TENSION SCREW

Arm Tension Adjustment

All other brand and product names are trademarks or registered trademarks of their respective owners.