Peerless-AV SS560F - Installation - Manual (Page 4)

4 of 9 ISSUED: 08-05-11 SHEET #: 009-9054-4 07-25-12
1 Attach upright (B) to base (A) with three 3/8-16 x 2.5" socket screws (F) and three M10 washers (K) as shown in
fi gure 1.1. Tighten screws using 7/32" allen wrench (J). Run cords through upright (B) using cord management
holes as shown in fi gure 1.2.
F
K
B
A
CORD
MANAGEMENT HOLE
CORD
MANAGEMENT HOLE
fi g. 1.1
fi g. 1.2
B
Slide display mounting bracket (C) onto upright (B)
so that 1/4-20 nuts (G) slide into slots of upright (B)
as shown in fi gure 3.1 and detail 1. Slide display
mounting bracket to desired position, level, then
tighten 1/4-20 x 12 mm screws (H) using 4 mm allen
wrench (I). Loosely attach six 1/4-20 x 12 mm screws (H) and
1/4-20 nuts (G) to display mounting bracket (C). 2
H
C
G
3
C
B
SLOT
fi g. 3.1
H
DETAIL 1
G
B