Peerless-AV PA740 - Installation - Manual (Page 10)

10 of 46 ISSUED: 01-27-08 SHEET #: 095-9283-8 01-25-12
10-32 x 1/2" screws are pretensioned and require
no adjustment. Rotate display by hand to level
display. Roll bracket allows 2° roll adjustment.
6
• Do not tighten screws with excessive force. Overtightening can cause damage to mount. Tighten screws
to 40 in. • lb (4.5 N.M.) maximum torque.
CAUTION
1/4-20 X 1/2" SCREWS
ROLL BRACKET
Attach cable tie anchor (N) to top or bottom of wall
arm (A) using 8-32 x 1/4" screw (O) as shown.
Secure cables to wall arm (A) using cable tie (M).
7
Cord Management
CORD
M
O
N
A
A
2° ROLL
7-1