Peerless-AV DMU50SM - Installation - Manual (Page 9)

Visit the Peerless Web Site at www.peerlessmounts.com ISSUED: 03-26-09 SHEET #: 125-9060-5 07-26-13
Secure media box to slide out bracket ( B) using four #4 flat washers (K) and four M3 x 8 mm phillips pan screws
( J) as shown in fig. 6.1. Position the slide out plate (B) into wall plate (A) making sure that the edge of the slide
out plate ( B) is inside spacers. Slide plate in until it is stopped by flange in top as shown in fig. 6.2. Use finger
holes when sliding slide out bracket ( B) in and out of wall plate (A).
6
fig. 6.1
fig. 6.2
MEDIA
BOX
B
J
K
A
B
SPACERS
FLANGE
Detail 1
FINGER
HOLES
Note: once slide out bracket (B) is in place use key (located with lock) to lock. Be sure to keep key in a safe place,
as you will not be able to remove the media box without it.
© 2013 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.