Peerless-AV MIS488 - Installation - Manual (Page 3)

3 of 4 ISSUED: 11-19-07 SHEET #: 124-9135-2 01-06-11
• Installer must verify that the supporting surface will safely support the combined weight of all attached equipment and
hardware.
Attach PC bracket (Q) to PC mounting bracket (U) using four 1/4-20 nylock nuts (T) and four 1/4-20 x 5/8" carraige
bolts (Y).
Attach PC mounting bracket (U) to existing pole
using four washers (N) and four hex nuts (I).
3
1 2
U
I
N
S
Attach six bumper strips (W) to PC bracket (Q).
Q
W
T
Y
Q
U
WARNING
EXISTING POLE