Peerless-AV SF632-AW - Installation - Manual (Page 9)

9 of 29 ISSUED: 09-19-11 SHEET #: 203-9041-2 02-08-12
Recommended Cleaning Guidelines
© 2011, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Peerless Industries, Inc.
2300 White Oak Circle
Aurora, Il 60502
www.peerlessmounts.com
The following procedures are not guaranteed to
control infection. An infection control administrator or
epidemiologist should be consulted regarding cleaning
procedures and processes.
Most painted components will withstand cleaning by
commonly used, diluted, non-abrasive solutions such
as quaternary ammonia compounds, ammonia enzyme
cleaners, and bleach or alcohol solutions. However,
it is recommended that any surface be tested in an
inconspicuous area prior to determine the propensity for
discoloration.
• Pen or permanent and dry erase markers can be
removed with 91% isopropyl alcohol and a soft cloth.
• Iodine stains can be removed with commonly used
cleaners and a soft cloth.
• Never use steel wool or other abrasive materials that will
damage the surface fi nish.
• Do not use Acetone, mineral spirits, abrasive cleansers,
paint thinner or any other harsh or toxic chemicals to clean
your product. These solvents will damage the surface
fi nish.
• To avoid risk of electric shock, do not expose
electrical components to water, cleaning solutions or
other potentially corrosive liquids or substances.
• Do not use fl ammable cleaners on product surfaces
due to close proximity of electrical power and
equipment.
WARNING