Peerless-AV SF632-AW - Installation - Manual (Page 8)

8 of 29 ISSUED: 09-19-11 SHEET #: 203-9041-2 02-08-12
Hook display onto wall plate (A) fi gure 4.1. Tighten
M5 x 12 mm screws (D), shown in fi gure 4.2 and
detail 1. Tighten screws using 4 mm security allen
wrench (O).
To remove display from mount, loosen screws (D)
and lift display off of mount.
Installing and Removing Flat Panel Display
4
A
DISPLAY
• Do not tighten screws with excessive force.
Overtightening can cause damage to mount. Tighten
screws to 20 in. • lb (2.26 N.M.) maximum torque.
CAUTION
• Do not lift more weight than you can handle.
Use additional man power or mechanical lifting
equipment to safely handle placement of the display.
• Failure to lock hook bracket with screws (D) can
cause display to come off mount if hit accidentally.
WARNING
DETAIL 1
fi g. 4.2
fi g. 4.1
A
D
B
B
A
D