Warning, Fg f – Peerless-AV SR560G - Installation User Manual

Page 13

13 of 13

ISSUED: 01-10-07 SHEET #: 009-9033-13 05-23-12

Peerless is a registered trademark of Peerless Industries, Inc.

All other brand and product names are trademarks or registered trademarks of their respective owners.

Mounting and Removing Flat Panel Screen

Hook adapter brackets (G) onto universal plate (F), then
slowly swing screen in as shown. Turn screws of adapter
brackets (G) clockwise at least six times to prevent
screen from being removed as shown in detail 4.
NOTE: Tighten using 4 mm allen wrench (R).

Screen can be adjusted horizontally if desired.

NOTE: It is important to lock screen down! To lock
the screen down, fully tighten screws to adapter bracket
as shown in detail 4.

To remove screen from mount, loosen screws, swing
screen away from mount, and lift screen off of mount.

DETAIL 4

SCREWS

Run cords through upright (H) using cord management holes.

CORD

MANAGEMENT

Cord Management

• Always use an assistant or mechanical lifting equipment to safely lift and position the plasma television.

WARNING