Warning, Aa bb – Peerless-AV PLCM-UNL-CP - Installation User Manual

Page 10

10 of 10

ISSUED: 08-20-02 SHEET #: 200-9405-12 11-18-11

Mounting and Removing Flat Panel Display

Hook adapter brackets (BB) onto universal PLP plate (AA), then slowly swing display in as shown. Turn safety/
security screws clockwise at least six times to prevent display from being removed as shown in detail 1.
Tighten all fasteners using wrench (FF).

Display can be adjusted horizontally if desired as shown in fi gure 6.1.

NOTE: To lock the display down, tighten safety/security screws to adapter bracket as shown in detail 1.

To remove display from mount, loosen safety/security screws, swing display away from mount, and lift display off of
mount.

DETAIL 1

SAFETY/SECURITY
SCREWS

Fig. 6.1

• Always use an assistant or mechanical lifting equipment to safely lift and position the plasma television.

WARNING

All other brand and product names are trademarks or registered trademarks of their respective owners.