Peerless-AV PP740 - Installation - Manual (Page 8)

8 of 46 ISSUED: 01-15-08 SHEET #: 095-9282-6 02-01-12
Attaching Hook Bracket to Display with VESA 75 or 100 Mounting Pattern
FOR VESA ® 75 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach hook
bracket (K) to back of display using four
M4 x 10 mm screws (E) as shown below.
FOR VESA 100 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach hook
bracket (K) to back of display using four
M4 x 10 mm screws (E) as shown below.
3
For display compatibility please refer to the fl at panel display interface list on our website www.peerlessmounts.com
or call customer care for a display specifi c adapter bracket LC or PLP models (not evaluated by UL).
For Installing to Peerless PLP Model Adapter Plate
(not evaluated by UL)
Note: Refer to PLP model adapter plate instruction
sheet for attachment of adapter plate to display.
Note: M5 x 10 mm screws are included with the
PLP model adapter plate.
Attach hook bracket (K) to adapter plate using four
M5 x 10 mm screws.
3
GENERIC ADAPTER PLATE
M5 X 10 mm SCREW
K
E
E
K K
• If screws don't get three complete turns in the display inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to display or product may fail.
WARNING