Warning, Ef e, Cord management – Peerless-AV SS560M - Installation User Manual

Page 13: Mounting and removing flat panel display, Detail 4

13 of 41

ISSUED: 02-25-11 SHEET #: 009-9052-2 10-30-11

All other brand and product names are trademarks or registered trademarks of their respective owners.

Peerless Industries, Inc.

2300 White Oak Circle

Aurora, Il 60502

www.peerlessmounts.com

Cord Management

Run cords through upright (G) using cord management holes.

CORD

MANAGEMENT

Mounting and Removing Flat Panel Display

Hook adapter brackets (F) onto universal plate (E),
then slowly swing display in as shown. Turn
screws of adapter plate (F) clockwise at least six
times to prevent display from being removed as
shown in detail 4.
NOTE: Tighten using 4 mm allen wrench (N).

Display can be adjusted horizontally if desired.

NOTE: It is important to lock display down!
To lock the display down, fully tighten screws to
adapter bracket as shown in detail 4.

To remove display from mount, loosen screws,
swing display away from mount, and lift display off
of mount.

• Always use an assistant or mechanical lifting equipment to safely lift and position the plasma television.

WARNING

DETAIL 4

SCREWS