Peerless-AV SS560G - Installation - Manual (Page 9)

9 of 41 ISSUED: 02-25-11 SHEET #: 009-9051-3 05-16-12
Insert two 1/4-20 x 12 mm screws (L) into display
mount bracket (A), leaving 3/16" of exposed thread
as shown in fi gure 10.1 and detail 3.
J
H
Snap top cover (J) onto upright (H). 10 9
fi g. 10.1
DETAIL 3
L
A
Loos ely attach six 1/4-20 x 12 mm screws (L) and
1/4-20 nuts (M) to display mount bracket (A).
7 S lide display mount bracket (A) onto upright (H) so
that 1/4-20 nut s (M) slide into slots of upright (H) as
shown in fi gure 8.1 and detail 2. Slide display mount
bracket to desired position, level, then tighten 1/4-
20 x 12 mm screws (L) using 4 mm allen wrench
(Q).
8
L
A
M
A
H
SLOT
fi g. 8.1
L
DETAIL 2
M
H
3/16"