Peerless-AV LCZ-3F419B - Installation - Manual (Page 4)

4 of 23 ISSUED: 04-05-11 SHEET #: 090-9199-3 05-29-12
Remove base cover from base (A) as shown in fi gure 1.1.
Hand tighten pole (C) onto base (A) as shown in fi gure 1.2. Tigthen set screw to secure pole using 3mm allen
wrench (K) as shown in rear view.
Feed cables through base cover. Insert base cover
onto pole (C). Insert lock collar (D) onto pole (C).
Adjust to desired height and tighten by hand.
BASE COVER
BASE COVER
1
2 3
Installation of Base
A
C
C
C
D
REAR VIEW
fi g 1.1
fi g 1.2
SET SCREW