Peerless-AV HLG440-PH-Q10 - Installation - Manual (Page 4)

4 of 4 ISSUED: 10-30-10 SHEET #:125-9164-2 09-14-11
5
DISPLAY
DISPLAY BASE
NOTE: Display and base may appear
different than illustrated
Installation of Security Screws for Base to Display Attachment
G
I
32" Display Base (No Screws Required)
Attach display to base using hardware provided with display using the manufactures installation manual.
42" Display Base
Attach display to base using two M5 x 20 mm socket pin screws ( G), two #10 split lock washers (H), and two
#10 flat washers ( I) into bottom holes as shown below. Tighten with 4 mm security allen wrench ( F).
Use screws supplied with display for remaining holes .
© 2010, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
42" Display Base Attachment Location
(note orientation of screws)
H