Peerless-AV SS560FK - Installation - Manual (Page 5)

5 of 10 ISSUED: 09-30-11 SHEET #: 009-9056-3 05-16-12
Attach column (B) to base (A) with three
3/8-16 x 2-1/2" button socket cap screws (L) and
three M10 lock washers (J). Tighten screws using
7/32" allen wrench (N). 1
A
L
J
B
Attach tilt plate (D) to bottom plate (Q) with four
M10 x 15 mm button socket cap screws (K).
Tighten screws using 6 mm allen wrench (M).
Attach the column bracket (C) to column (B) with
three 3/8-16 x 1" button socket cap screws (H).
Tighten screws using 7/32" allen wrench (N).
Attach tilt plate (D) to column bracket (C) with four
5/16-18 x 3/8" button socket cap screws (I) as
shown in rear view.
Tilt can be adjusted to 0° or 30°.
3
2
4
REAR VIEW
D
K
D
Q
C
C
I
H
B