Peerless-AV LCZ-4F430B - Installation - Manual (Page 4)

4 of 23 ISSUED: 04-05-11 SHEET #: 090-9200-5 (2013-12-03)
Hand tighten pole (C) onto base (A) as shown in fi gure 1.1. Tighten set screw to secure pole using 3mm allen
wrench (K) as shown in rear view.
Feed cables through base cover (M). Insert base
cover onto pole (C). Insert lock collar (D) onto pole (C).
Adjust to desired height and tighten by hand.
1
2 3
Installation of Base
C
C
C
M
D
REAR VIEW
fi g 1.1
SET SCREW