Peerless-AV MIS377 - Installation - Manual (Page 2)

ISSUED: 03-16-07 SHEET #: 124-9213-1
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112 or 708-865-8870.
2 of 6
Note: Read entire instruction sheet before you start installation and assembly.
For customer care call (800) 865-2112 or (708) 865-8870.
• Do not begin to install your Peerless product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please
call Peerless customer care at 1-800-865-2112.
• This product should only be installed by a qualified professional.
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached
hardware and components.
• Never exceed the Maximum Load Capacity of 50 lb (23 kg).
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding
power.
WARNING
Tools Needed for Assembly
• level
• phillips screwdriver
• drill
• 1/2'' drill bit
• pencil
1
NOTE: Top of flange indicates the top of Samsung 23" screen. Arrow on wall template faces up.
Place wall template (AA) on wall (refer to MIS378 wall template instruction sheet). Level template and mark center
of mounting holes. Drill four 1/2" (13mm) dia. holes 2" (50mm) deep.
NOTE: Do not drill through neighboring wall as shown.
NEIGHBORING WALL
LEVEL
2”
(50 mm)
FLANGE
Ø 1/2”
(13 mm)
WALL TEMPLATE (AA)
ARROW