Peerless-AV HT642 - Installation - Manual (Page 9)

9 of 9 ISSUED: 08-18-08 SHEET #: 125-9012-4 12-19-13
© 2010 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
8 Remove top two M5 x 12 mm socket pin serrated washer head screws (
D
) attached to wall plate (
A
). Loosen two
M5 x 12 mm socket pin serrated washer head screws (
D
) in slot as shown in Detail 1. Once desired tilt is
established tighten two M5 x 12 mm socket pin serrated washer head screws (
D
) in slots.
Mounting Bracket Using Tilt Option
D
B
D
A
Detail 1
D
SLOT
D