Peerless-AV HL442-HT3-S - Installation - Manual (Page 4)

ISSUED: 02-06-08 SHEET #: 090-9141-1
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
4 of 5
Swivel restriction option
Race box (A) can be restricted to 10, 30, 60, or 90 degrees of swivel. To restrict swivel, be certain wood screw with
spacer is aligned with locking tab and facing back. Insert two M5 x 6 mm screws (E) into holes on left and right
side for desired degree of swivel restriction.
10°
30°
60°
90°
E
KEEP SCREW WITH SPACER ALIGNED
WITH LOCKING TAB FACING BACK.
EXAMPLE: INSTALLED
IN HOLES FOR 30°
SWIVEL RESTRICTION
A
A
Chose the correct mounting hole pattern shown in figure 2.1 for mounting adapter plate (B) to LCD stand. Position
adapter plate (B) with hook flanges facing bottom and locking tab facing back. Attach adapter plate (B) to LCD
stand using the appropriate number of M6 x 30 mm phillips screws (J) and spacers (H) as shown in figure 2.2.
Note: Remove rubber pads on LCD stand that prevent a flush fit of adapter plate to LCD stand.
A. LC-32HT3U,
LC-37HT3U
B. LC-42HT3U
B
B
2
fig 2.2
HOOK
FLANGES
FACE
BOTTOM
fig 2.1
BACK OF
LCD STAND
LOCKING
TAB FACES
BACK
J
B
H
REMOVE
RUBBER PADS
1-1
LCD STAND MAY APPEAR
DIFFERENT THAN
ILLUSTRATED