Peerless-AV HL442-HT3-S - Installation - Manual (Page 3)

ISSUED: 02-06-08 SHEET #: 090-9141-1
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
3 of 5
MOUNTING
SURFACE
Rotate the swivel base so large holes in race plate align with mounting holes in swivel base as shown in figure 1.1.
Place race plate on mounting surface in the desired location.
Note: See detail 1 for overlap distance of LCD stand from front edge of race box. Dimensions indicated in detail 1
should be the minimum distance from front edge of mounting surface.
Be certain locking tab is facing back then attach swivel base to mounting surface using four wood screws (C) as
shown in figure 1.2.
Note: If swivel restriction is desired, use spacer (D) and screw (C) in hole closest to locking tab, then refer to swivel
restriction option, step 1-1. If swivel restriction is not required, skip to step 2. 1
MOUNTING
SURFACE
LOCKING TAB
FACES BACK
C
D
SPACER (D) IS USED IF
SWIVEL RESTRICTION IS
DESIRED
A
fig 1.2
C
ALIGN MOUNTING HOLE
WITH LOCKING TAB
REFER TO THE MINIMUM DISTANCE IN DETAIL 1 BEFORE
DETERMINING LOCATION TO SECURE MOUNT.
LCD STAND FOR LC-42HT3U LCD STAND FOR LC-32HT3U LCD STAND FOR LC-37HT3U
DETAIL 1 (Overlap of LCD stand from front edge of race box)
7/8"
2-1/4" 1-7/8"
fig 1.1
LOCKING TAB FACES BACK
LARGER HOLES IN
RACE PLATE
MOUNTING HOLE IN
SWIVEL BASE
A