Peerless-AV HT642-002 - Installation - Manual (Page 7)

7 of 9 ISSUED: 03-02-11 SHEET #: 125-9192-1
Using information provided in detail 1 secure two adapter brackets ( L) to back of display using four M4 x 12 mm
phillips screws ( D) or four M6 x 16 mm phillips screws (E).
NOTE: When using M4 x 12 mm phillips screws (D), #8 washers (C) are required.
NOTE: Adapter brackets (L) have 2" of vertical adjustment as shown in detail 1.
200 mm
100 mm
BOTTOM OF DISPLAY
200 mm x 100 mm HOLE
PATTERN SHOWN ABOVE
400 mm
200 mm
2" OF VERTICAL
ADJUSTMENT
2
L
L
D or E
C
BOTTOM OF DISPLAY
200 mm x 100 mm
200 mm x 200 mm
400 mm x 200 mm
3
Using information in hole pattern detail secure cross support bracket ( A) to adapter brackets (L) with four
1/4-20 nylock nuts ( M).
M
A
DETAIL 1
L
L